Alu Ranger

Architecture

CNC Machining Centres

Sizing, routing and drilling on composite aluminium (ACM), aluminium panels, fibrecement, plasterboard, soundproof panels, door panels, HPL, aluminium honeycomb etc.. are only a few of the materials that the Alu Ranger series is able to process.

These machines are characterized by a large working surface easy to reach and very little space occupied in the workshop.

Speed, high productivity, reliability make these Vertical Machining Centres a reference in the construction field and architectural cladding.

It is possible do jobs with Nesting so that the panels are optimized at maximum.

The Cad-Cam parametric equipped with machine allows you to draw and therefore work different shapes. The panel references found on the lower left hand side of machine (optionals on right hand side) allow you, thanks to the bearings, move the panel easily.

The choice of complementary machines you can choose from allow a wide offer range.

*DAILY AVERAGE OUTPUT, Nesting working, cassette surface 1 sq/metre (10,7 ft), 8 working hours shift



Our Machines

Click the name for specifications

ALU RANGER 4216 L2R

ALU RANGER 4221 oneR

ALU RANGER 6321 oneR

ALU RANGER 4221 VGroove

ALU RANGER 6321 VGroove

ALU RANGER 10121 VGroove

ALU LOADER


E550 Machine

ALU RANGER 4216 L2R


Space, two machines in one, speed, ergonomics, easy to use, are important words all summarized in the Alu Ranger 4216 L2R Vertical Machining Centre.

This machine has been conceived to obtain the best performances in productivity processing alu composites materials: ACM - ACP - Alucobond® - Alpolic® - Dibond® - Larson® - Reynobond® - Alubond® - Albond® etc



Technical Specifications

Description ALU RANGER 4216 L2R
Working field X 4200 - Y 1600 - Z 90 mm
Working field X 14’ - Y 5’2" - Z 3"
Overall dimensions 2,0 x 5,8 mt - 6,5' x 19'
Surface occupied by machine ca. 11 sq/mt - 118 sq/ft
Grooved working table with MDF sacrificial board 5 areas for panel locking with vacuum
Vacuum pump 1 x 100 m³/h - 1 x 59 CFM
Axis speed X 24 - Y 24 - Z 10 mt/min
Axis speed X 78 - Y 78 - Z 32 ft/min
Routing unit R33M 18000 RPM - 3,3 KW - x 2 chuck collet ER32
Routing unit R22M (opt.) 24000 RPM - 2,2 KW - chuck collet ER25
Drilling unit D037 (opt.) up to Ø 6 mm up to Ø 15/64
Electrical power Total connection load 12 KW (4216 L2R - 4221 L2R)
Total weight ca. 2.200 Kg - ca. 4.850 pounds

Advantages & Benefits

  • Minimum space occupied
  • High safety standards
  • Ergonomic loading/unloading
  • Easy to use and clean
  • Vacuum locked panels on rectified surface
  • Completely Automatic
  • Very fast tool change
  • No man operating errors
  • Automatic tool changing on each operation
  • Milling shapes
  • Nesting to reduce panel waste
  • High efficiency optimization
E550 Machine

ALU RANGER 4221 oneR


The Alu Ranger 4221 oneR vertical machining centre allows high working flexibility to be combined with a limited investment.

The machine works with composite materials such as: ACM – ACP – Alucobond® – Alpolic® – Dibond® – Larson® – Reynobond® – Alubond® – Albond® thanks to the 8 toolholder positions available for 8 tools or right-angle heads.



Technical Specifications

Description ALU RANGER 4221 oneR
Worktable X 4200 – Y 2100 – Z 90 mm
Axis speed X 30 – Y 30 – Z 10 metres/minute
Vacuum worktable with sacrificial board in MDF divided into 6 areas (selected from PLC)
Vacuum pump 1 x 250 m³/h Made in Germany
Tool changer on worktable edge 8 positions – ISO 30 tapers – taper presence sensor
R55A electrospindle 5.5 kW – ER32 collet – 24,000 rpm
Two ISO 30 aggregates with V-Groove miller ø 125 mm at 90° for "X" and "Y" milling positioned on the worktable edge (optional)
Two ISO 30 aggregates with saw blade ø 125 mm at 90° for "X" and "Y" cutting positioned on the worktable edge (optional)
Overall dimensions 2.1 x 6.3 metres
Surface occupied approx. 13 m2
Maximum weight of panels being machined approx. 250 kg
Total absorbed power approx. 14 kW
Total weight approx. 2700 kg

Advantages & Benefits

  • Minimum space occupied
  • Rapid tool changes
  • High safety standards
  • Ergonomic loading and offloading
  • Easy to use and clean
  • Panels held in place by vacuum on ground surfaces
  • Automatic vacuum level control
  • Fully automatic
  • No possibility of operator errors
  • Automatic tool changes for every operation
  • Milling of shapes and curves
  • Nesting procedures to reduce panel wastes
  • Job optimization and high efficiency
E550 Machine

ALU RANGER 6321 oneR


The Alu Ranger 6321 oneR vertical machining centre allows high working flexibility to be combined with a limited investment.

The machine works with composite materials such as: ACM – ACP – Alucobond® – Alpolic® – Dibond® – Larson® – Reynobond® – Alubond® – Albond® thanks to the 8 toolholder positions available for 8 tools or right-angle heads.



Technical Specifications

Description ALU RANGER 6321 oneR
Worktable X 6300 – Y 2100 – Z 90 mm
Axis speed X 30 – Y 30 – Z 10 metres/minute
Vacuum worktable with sacrificial board in MDF divided into 8 areas (selected from PLC)
Vacuum pump 2 x 250 m³/h Made in Germany
Tool changer on worktable edge 8 positions – ISO 30 tapers – taper presence sensor
R55A electrospindle 5.5 kW – ER32 collet – 24,000 rpm
Two ISO 30 aggregates with saw blade ø 125 mm at 90° for "X" and "Y" cutting positioned on the worktable edge (optional)
Two ISO 30 aggregates with V-Groove miller ø 125 mm at 90° for "X" and "Y" milling positioned on the worktable edge (optional)
Overall dimensions 2.1 x 8.3 metres
Surface occupied approx. 17.5 m2
Maximum weight of panels being machined approx. 250 kg
Total absorbed power approx. 19 kW
Total weight approx. 3600 kg

Advantages & Benefits

  • Minimum space occupied
  • Rapid tool changes
  • High safety standards
  • Ergonomic loading and offloading
  • Easy to use and clean
  • Panels held in place by vacuum on ground surfaces
  • Automatic vacuum level control
  • Fully automatic
  • No possibility of operator errors
  • Automatic tool changes for every operation
  • Milling of shapes and curves
  • Nesting procedures to reduce panel wastes
  • Job optimization and high efficiency
E550 Machine

ALU RANGER 4221 VGroove


The Alu Ranger 4221 VGroove vertical machining centre allows high working flexibility to be combined with a limited investment.

The machine works with composite materials such as: ACM – ACP – Alucobond® – Alpolic® – Dibond® – Larson® – Reynobond® – Alubond® – Albond® thanks to the 8 toolholder positions available for 8 tools or right-angle heads.



Technical Specifications

Description ALU RANGER 4221 VGroove
Working capacity X 4200 - Y 2100 - Z 90 mm
Working capacity X 14’ - Y 6' 11” - Z 3"+1/2
Overall dimensions 2,0 x 7,9 mt
Overall dimensions 6' 7" x 26'
Surface occupied by machine ca. 11 sq/mt - 118 sq/ft
Vacuum panel holding, working table with MDF sacrificial board Divided in 6 zones - control via PLC
Vacuum pump 1 x 250 m³/h - 1 x 147 CFM
Axis speed X 30 - Y 30 - Z 10 mt/min
Axis speed X 98 - Y 98 - Z 33 ft/min
Electrospindle Routing head (STD) R55A 5,5 KW (7,5 HP) chuck collet ER32 - 18000-24000 RPM
Automatic Router Unit (STD) TC6 Servo controlled - 6 positions - Iso 30 cones
Two ISO 30 aggregates with 90° saw blade, for "X" and "Y" cutting - positioned on edge of working table
V-grooving unit (STD) V175-5 5 KW Motor / 175 mm - 7" - V-grooving Disc - Z20 / 0-90° Swivel
Total power load ca. 22 KW
Total weight ca. 2.450 Kg - ca. 5410 Lb

Advantages & Benefits

  • Minimum space occupied
  • Very fast tool change
  • Tool changer travelling with the operating head
  • High safety standards
  • Ergonomic loading/unloading
  • Easy to use and clean
  • Vacuum locked panels on rectified surface
  • Full control of the vacuum for release
  • Completely Automatic
  • No man operating errors
  • Automatic tool changing on each operation
  • Milling shapes
  • Nesting to reduce panel waste
  • High efficiency optimization
E550 Machine

ALU RANGER 6321 VGroove


The Vertical Machining Centre Alu Ranger 6321 VGroove takes the name of the unique "V" grooving cutterhead disc which allows you to increase considerably the daily output.

This machine has been conceived to obtain the best productivity performances with composites materials: ACM - ACP - Alucobond® - Alpolic® - Dibond® - Larson® - Reynobond® - Alubond® - Albond® etc.



Technical Specifications

Description ALU RANGER 6321 VGroove
Working capacity X 4200 - Y 2100 - Z 90 mm
Working capacity X 14’ - Y 6' 11” - Z 3"+1/2
Overall dimensions 2,0 x 7,9 mt
Overall dimensions 6' 7" x 26'
Surface occupied by machine ca. 11 sq/mt - 118 sq/ft
Vacuum panel holding, working table with MDF sacrificial board Divided in 6 zones - control via PLC
Vacuum pump 1 x 250 m³/h - 1 x 147 CFM
Axis speed X 30 - Y 30 - Z 10 mt/min
Axis speed X 98 - Y 98 - Z 33 ft/min
Electrospindle Routing head (STD) R55A 5,5 KW (7,5 HP) chuck collet ER32 - 18000-24000 RPM
Automatic Router Unit (STD) TC6 Servo controlled - 6 positions - Iso 30 cones
Two ISO 30 aggregates with 90° saw blade, for "X" and "Y" cutting - positioned on edge of working table
V-grooving unit (STD) V175-5 5 KW Motor / 175 mm - 7" - V-grooving Disc - Z20 / 0-90° Swivel
Total power load ca. 22 KW
Total weight ca. 2.450 Kg - ca. 5410 Lb

Advantages & Benefits

  • Minimum space occupied
  • Vert fast tool change
  • Tool changer travelling with the operating head
  • High safety standards
  • Ergonomic loading/unloading
  • Easy to use and clean
  • Vacuum locked panels on rectified surface
  • Full control of the vacuum for release
  • Completely automatic
  • No man operating errors
  • Automatic tool changing on each operation
  • Milling shapes
  • Nesting to reduce panel waste
  • High efficiency optimization
E550 Machine

ALU RANGER 10121 VGroove


The Vertical Machining Centre Alu Ranger 10121 VGroove takes the name of the unique "V" grooving cutterhead disc which allows you to increase considerably the daily output.

This machine has been conceived to obtain the best productivity performances with composites materials: ACM - ACP - Alucobond® - Alpolic® - Dibond® - Larson® - Reynobond® - Alubond® - Albond® etc.



Technical Specifications

Description ALU RANGER 10121 VGroove
Working Capacity X 10100 - Y2100 - Z90 mm
Overall dimensions 2,1 x 12 mt - 6' 10" x 39' 4"
Surface occupied by machine ca 25,2 sqm - 271 sq/ft
Vacuum panel holding, working table with MDF sacrificial board divided in 12 zones - manual control
Vacuum pump 4 x 250 m3/h
Axis speed X 30 - Y30 - Z10 mt/min
Electrospindle Routing Head R55A 5,5 Kw - chuck collet ER32 - 24000 RPM
Automatic Tool Changer TC6 Servo controlled - 6 positions - ISO 30 cones
Two ISO 30 Aggregates with 90° saw blade for cut in "X" and "Y" positioned on edge of working table
V-grooving unit V175-5 Motor 5 Kw - V-Grooving disc 175 mm - 0-90° swivel
Total power absorbed 35 Kw
Max weight of panel under process ca. 500 Kg 1102Lb
Total weight ca. 5.000 Kg.

Advantages & Benefits

  • Minimum space occupied
  • Vert fast tool change
  • Tool changer travelling with the operating head
  • High safety standards
  • Ergonomic loading/unloading
  • Easy to use and clean
  • Vacuum locked panels on rectified surface
  • Full control of the vacuum for release
  • Completely automatic
  • No man operating errors
  • Automatic tool changing on each operation
  • Milling shapes
  • Nesting to reduce panel waste
  • High efficiency optimization
E550 Machine

ALU LOADER


The Alu Loader, with 2 holding arms (4 arms on the Alu Loader 63) - (6 arms on the Alu Loader 101) and suction cups connected to the vacuum system, loads and positions wood based panels on the Multi Ranger or Alu Ranger.

This machine has been conceived to obtain the best performances in productivity processing alu composites materials: ACM - ACP - Alucobond® - Alpolic® - Dibond® - Larson® - Reynobond® - Alubond® - Albond® etc



Technical Specifications

Description Alu Loader 42 Alu Loader 63 Alu Loader 101
Min. panel dimensions 1000 mm height x 2500 mm length 1000 mm height x 2500 mm length 1000 mm height x 2500 mm length
Max. panel dimensions 2100 mm height x 4200 mm length 2100 mm height x 8000 mm length 2100 mm height x 12000 mm length
Max. stacking height 400 mm 400 mm 400 mm
Max. weight each panel Kg. 65 Kg. 130 Kg. 130

Advantages & Benefits

  • Only one operator to load and unload panels
  • High ergonimic panel loading
  • No risk of panels falling accidentally
  • Panels are far away from working area and unloading of working pieces
  • Overlap loading time